Power loss, motor malfunction and failing parts are just a few of the things that can lead to a non-functioning garage door. Thankfully, some of these problems can be fixed by pulling the emergency release cord and fixing the problem yourself. Continue reading to learn how to reset your garage door in Denton, TX.
Put the door in the down position
Your door must be in the down position before you continue working on this project yourself. If the door is stuck up or halfway down, call a professional to address the issue. You run the risk of injuring yourself or others by trying to fix a door that’s stuck open.
Pull the emergency release cord
As long as the door is down, you can go ahead and pull the red emergency release cord down. This cord essentially disconnects the trolley and springs from the opener, allowing you to open and close the door manually.
Manually move the garage door up and back down
As stated above, you can manually open and close the door now that the trolley is disconnected from the opener. Move the door from the down position, all the way up and then back down. This will ensure the door is ready to re-engage with the opener.
Reconnect the trolley to the opener carriage
Reconnecting the trolley to the opener is a two-step process. First, pull the emergency release cord down and towards the door. This step will compress the spring lever, allowing you to eventually solve one of the common garage door issues in Denton, TX.
After pulling the cord—which will put…